The EPEVER Tracer AN Sequence Photo voltaic Demand Controller can be a really productive photo voltaic controller made for off-grid photo voltaic devices. According to multiphase synchronous rectification technology, it assures optimized Power conversion and program security for a wide array of photovoltaic (PV) apps.
Critical Options of your EPEVER Tracer AN Collection Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technology for excellent solar Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Stage Charging for Improved battery existence.
LCD Show with actual-time information monitoring.
Numerous Load Control Modes including manual and timer.
Comprehensive Digital Protections versus overcharging, around-discharging, small circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer guide.
Confirm the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Find a very well-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Keep suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Normally observe appropriate basic safety protocols and ensure the method is run off in advance of connecting elements.
Step one: Hook up the battery terminals into the demand controller (positive to positive, negative to unfavorable).
Stage 2: Hook up the solar panel array to the PV enter terminals.
Stage 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery first.
Utilize the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
5. Checking Click Here and Info Logging
The Tracer AN Series supports true-time monitoring utilizing the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing program for example Solar Station Laptop.
Remote checking is possible Together with the EPEVER WiFi module.
6. Troubleshooting Prevalent Problems
Challenge 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Protection
Validate the solar array’s voltage score.
Adjust technique parameters if necessary.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Lessened Vitality losses all through conversion.
Enhanced Dependability: Secure efficiency underneath variable loads.
More time Battery Everyday living: Steady and precise charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification technological know-how is surely an Fantastic choice for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup guidebook, people can ensure highest effectiveness and procedure longevity.