The EPEVER Tracer AN Collection Solar Charge Controller is actually a very effective photo voltaic controller suitable for off-grid solar units. Based upon multiphase synchronous rectification technology, it makes sure optimized Strength conversion and program stability for a wide array of photovoltaic (PV) applications.
Crucial Options from the EPEVER Tracer AN Series Controller
The Tracer AN collection utilizes EPEVER Photo voltaic Demand Controller technologies for excellent photo voltaic Electricity harvesting. Important features incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Sophisticated MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for Increased battery existence.
LCD Exhibit with true-time details checking.
Numerous Load Management Modes such as guide and timer.
Detailed Digital Protections versus overcharging, around-discharging, short circuits, and reverse polarity.
Move-by-Stage Tutorial to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Be certain all factors are provided: Tracer AN device, temperature sensor, communication cables, and user manual.
Verify the model amount and voltage ratings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick out a well-ventilated, dry locale near to the battery lender.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Keep proper clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Caution: Always follow good basic safety protocols and ensure the process is driven off ahead of connecting components.
Action 1: Link the battery terminals on the demand controller (favourable to positive, detrimental to adverse).
Move two: Hook up the solar panel array to the PV input terminals.
Phase 3: Hook up the load terminals if utilizing a direct load link.
Move four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load visit here Control Modes: Guide, timer, light Regulate.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time checking utilizing the MT50 remote meter.
Details might be logged by using the RS485 interaction port making use of computer software for example Solar Station Laptop.
Remote checking is feasible While using the EPEVER WiFi module.
6. Troubleshooting Widespread Problems
Challenge 1: No Ability Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: Above-Voltage Security
Verify the solar array’s voltage ranking.
Alter system parameters if important.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT settings while in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technology makes sure:
Larger Performance: Lowered Vitality losses throughout conversion.
Improved Reliability: Stable effectiveness below variable masses.
Lengthier Battery Lifetime: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological innovation can be an Remarkable choice for optimizing solar energy technology and extending battery daily life. By adhering to the above set up information, users can make certain utmost efficiency and program longevity.