The EPEVER Tracer AN Series Photo voltaic Cost Controller is actually a remarkably efficient solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for remarkable photo voltaic Electricity harvesting. Vital options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery everyday living.
Liquid crystal display Display screen with genuine-time facts checking.
A number of Load Management Modes like guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Step Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Confirm the model quantity and voltage ratings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Caution: Click Here Usually follow good basic safety protocols and ensure the system is run off ahead of connecting parts.
Phase 1: Join the battery terminals to your cost controller (constructive to optimistic, negative to destructive).
Action 2: Join the photo voltaic panel array towards the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Configurations
Ability to the controller by connecting the battery to start with.
Utilize the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, mild Handle.
5. Checking and Information Logging
The Tracer AN Collection supports true-time monitoring utilizing the MT50 distant meter.
Information might be logged through the RS485 communication port applying software package including Photo voltaic Station Personal computer.
Remote checking is feasible Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Alter system parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Advantages of the Tracer AN Sequence with MSR Engineering
The multiphase synchronous rectification technological innovation ensures:
Greater Effectiveness: Reduced Strength losses throughout conversion.
Improved Trustworthiness: Stable effectiveness below variable masses.
Longer Battery Daily life: Consistent and accurate charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological innovation is definitely an Outstanding option for optimizing solar power era and increasing battery lifestyle. By pursuing the above mentioned setup tutorial, end users can make certain highest efficiency and procedure longevity.